Contact Us
631-768-8301
Stainless Steel Bathroom Partitions
Our stainless steel bathroom partitions offer a polished, high-end appearance with the durability to handle demanding environments.
Flush Metal Stainless Steel Bathroom Partitions
Flush Metal stainless steel bathroom partitions not only have a lustrous, quality appearance, but are extremely durable as well.
Pilaster, door, and partition panels can be cleaned and maintained with great ease. Recommended for areas of high humidity. Our textured stainless steel partitions provide the maximum protection against graffiti and physical abuse.
- Increased ease in maintenance and cleaning
- Lustrous high quality appearance
- Recommended for areas of high humidity
- Extremely durable
Partition Models
Flushung
Ceiling Hung
Completely suspended from ceiling and wall, leaving the floor area below unobstructed. Requires structural support in ceiling; specified where ease of cleaning and maintenance are a high priority.
Flushart
Floor Anchored
Require no top bracing; flush top gives a modern appearance. Specified for installations in which pilasters can be fastened to solid floors; creates a streamlined, open look while maintaining dependable support and stability.
Flushite
Overhead Braced
Floor-supported with anti-grip headrail, allowing maximum support for the stresses of daily use. Most economical product.
Freedom Series
Total Privacy
Featuring 75-inch-high doors and panels with an internal wood frame, continuous U-brackets, and 71-inch piano hinges for strength and stability. A no-sight design removes sightline gaps for added privacy, while limited exposed screws help maintain a clean, finished appearance.
No-Sight Privacy Series
No-sight Design
Flush Metal uses a full height, continuous stop and hinge side filler which eliminates sightline gaps around the door. Our No-Sight Privacy Series offers doors and panels 64” high and in heights up to 78”; available in all mounting styles above.
Partition Specs
Door & Panels
Door & panels shall be 1″ thick insulated with a honeycomb core. Face plates shall be not less than 22 gauge stainless steel and shall have a molding interlocking all edges. Door edges shall be welded at intervals around perimeter to insure a rigid unit. Corners shall be welded and ground smooth. Panels available in 20 gauge.
Pilasters
Pilasters shall be 1-1/4″ constructed of 20 gauge steel insulated with a sound deadening honeycomb core. Edges shall be welded at intervals around perimeter to insure a rigid unit. Edges to be interlocked with molding corners to be welded and ground smooth. 3/8″ stud bolts shall be furnished for fastening to concrete.
Hardware
Compartment is to be complete with all hardware and fastenings for a complete installation. Hardware to include wrap around door hinges, latch, stop and keeper and coat hook. Lower hinge to be recessed in the door and shall operate on opposing nylon cams. Upper hinge shall operate on a pin anchored above and below the hinge bracket. Latch to be concealed type with emergency access features. All hardware to be Zamac chrome plated.
Fittings
Wall and U-brackets to be chrome plated. Door strikes and hinges to be fastened by means of “one-way” head tamper proof chrome plated sex bolts. All other screws to be Philips head chrome plated. All pilasters to have a 3″ high stainless steel shoe. Brass and stainless steel hardware available at additional cost.
Finish
All stainless steel units shall have a #4 finish and shall be vinyl covered for protection during shipment and installation. The protective covering helps preserve the appearance of the material by guarding against scratches, scuffs, and jobsite debris before final use. This helps ensure the partitions arrive in good condition and maintain a clean, finished look through the installation process.
Color
Finish shall be #304 stainless steel with a #4 textured finish, offering a bright, clean appearance with a subtle brushed pattern. The textured surface gives the material added visual depth while helping create a more refined, industrial look that works well in both modern and high-use commercial restroom settings.
Features
Concealed Latch
This latch has a complete mechanism concealed within the door. Emergency access feature is standard.
Structural Member
This type of mounting, used on both our Flushart and Flushung, assures maximum rigidity and durability.
Leveling Device
This mechanism has been designed to accelerate installation and to provide maximum rigidity at floor connection.
Construction
All components have an interlocking molding and are welded at intervals to insure maximum structural strength.
Honeycomb Core
Cellular honeycomb core is bonded and laminated to face plates providing maximum adhesion.
Anti-Grip Headrail
This type of construction on all Flushite compartments avoids chinning and provides maximum rigidity, as well.
Our Commitment to Quality
Quality is at the core of everything we produce. Each project is carefully manufactured using vetted materials and processes, followed by thorough in-house inspections before leaving our facility. This attention to detail ensures that every product meets the performance expectations of real-world environments.
Architects and project teams rely on Flush Metal not just for the product itself, but for guidance in selecting the right solutions for durability, efficiency, and long-term value.
General Care & Maintenance of Bathroom Partitions
To clean baked enamel partitions, wash with warm water, using mild soap only, rinse and dry thoroughly with a soft cloth. Do not allow cleaning agent to dry on finished surface.
To maintain a high quality finish, we recommend waxing material periodically with a quality wax recommended for baked enamel finishes.
Do not use an abrasive material, harsh cleanser or any cleanser containing chemical detergents or acids.